Microsoft Office 365

9月 062019
 

A few years ago I shared a method to publish content from SAS to a Slack channel. Since that time, our teams at SAS have gone "all in" on collaboration with Microsoft Office 365, including Microsoft Teams. Microsoft Teams is the Office suite's answer to Slack, and it's not a coincidence that it works in nearly the same way.

The lazy method: send e-mail to the channel

Before I cover the "deluxe" method for sending content to a Microsoft Teams channel, I want to make sure you know that there is a simple method that involves no coding, and no need for APIs. The message experience isn't as nice, but it does the job. You can simply "send e-mail" to the channel. If you're automating output from SAS, it's a simple, well-documented process to send e-mail from a SAS program. (Here's an example from me, using FILENAME EMAIL.)

When you send e-mail to a Microsoft Teams channel, the message notice includes the message subject line, sender, and the first bit of the message content. To see the entire message, you must click on the "View original e-mail" link in the notice. This "downloads" the message to your device so that you can open it with a local tool (such as your e-mail reader, Microsoft Outlook). My team uses this method to receive certain alerts from our communities.sas.com platform. Here's an example:

To get the unique e-mail address for a channel, right-click on the channel name and select Get email address. Any message that you send to that e-mail address will be distributed to the team.

Getting started with a Microsoft Teams webhook

In order to provide a richer, more integrated experience with Microsoft Teams, you can publish content using a webhook. A webhook is a REST API endpoint that allows you to post messages and notifications with more control over the appearance and interactive options within the messages. In SAS, you can publish to a webhook by using PROC HTTP.

To get started, you need to add and configure a webhook for your Microsoft Teams channel:

  1. Right-click on the channel name and select Connectors.
  2. Microsoft Teams offers built-in connectors for many different applications. To find the connector for Incoming Webhook, use the search field to narrow the list. Then click Add to add the connector to the channel.
  3. You must grant certain permissions to the connector to interact with your channel. In this case, you need to allow the webhook to send messages and notifications. Review the permissions and click Install.
  4. On the Configuration page, assign a name to this connector and optionally customize the image. The image will be the avatar that's used when the connector posts content to the channel. When you've completed these changes, select Create.
  5. The connector generates a unique (and very long) URL that serves as the REST API endpoint. You can copy the URL from this field -- you will need it later in your SAS program. You can always come back to these configuration settings to change the connector avatar or re-copy the URL.

    At this point, it's a good idea to test that you can publish a basic message from SAS. The "payload" for a Teams message is a JSON-formatted structure, and you can find examples in the Microsoft Teams reference doc. Here's a SAS program that publishes the simplest message. Add your webhook URL and run the code to verify the connector is working for your channel.

    filename resp temp;
    options noquotelenmax;
    proc http
      /* Substitute your webhook URL here */
      url="https://outlook.office.com/webhook/your-unique-webhook-address-it-is-very-long"
      method="POST"
      in=
      '{
          "$schema": "http://adaptivecards.io/schemas/adaptive-card.json",
          "type": "AdaptiveCard",
          "version": "1.0",
          "summary": "Test message from SAS",
          "text": "This message was sent by **SAS**!"
      }'
      out=resp;
    run;

    If successful, this step will post a simple message to your Teams channel:

    Design a message card for Microsoft Teams

    Now that we have the basic plumbing working, it's time to add some bells and whistles. Microsoft Teams calls these notifications "message cards", which are messages that can include interactive features such as images, data, action buttons, and more.

    Designing a simple message

    Microsoft Teams supports a large palette of building blocks (expressed in JSON) to create different card experiences. You can experiment with these cards in the MessageCard Playground that Microsoft hosts. The tool provides templates for several card varieties, and you can edit the JSON definitions to tweak and design your own.

    For one of my use cases, I designed a simple card to show the status of our recommendation engine on SAS Support Communities. (Read this article for more information about how we built and monitor the recommendation engine.) The engine runs as a service and is accessed with its own API. I wanted a periodic "health check" to post to our internal team that would alert us to any problems. Here's the JSON that I used in the MessageCard Playground to design it.

    Much of the JSON is boilerplate for the message. I drew the green blocks to indicate the areas that need to be dynamic -- that is, replaced with values from the real-time API call. Here's what the card looks like when rendered in the Microsoft Teams channel.

    Since my API call to the recommendation engine service creates a data set, I can run that data through PROC JSON to create the JSON segment I need:

    /* reading the results from my API call to the engine */
    libname results json fileref=resp;
     
    /* Prep a simple name-value data set with the results */
    data segment (keep=name value);
     set results.root;
     name="Score data updated (UTC)";
     value= astore_creation;
     output;
     name="Topics scored";
     value=left(num_topics);
     output;
     name="Number of users";
     value= left(num_users);
     output;
     name="Process time";
     value= process_time;
     output;
    run;
     
    /* use PROC JSON to create the segment */
    filename segment temp;
    proc json out=segment nosastags pretty;
     export segment;
    run;

    I shared a version of the complete program on GitHub. It should run as is -- but you would need to supply your own webhook endpoint for a channel that you can publish to.

    Design a message with actions

    I also use Microsoft Teams to share updates about the SAS Software GitHub organization. In a previous article I discussed how I use GitHub APIs to gather data from the GitHub service. Each day, my program summarizes the recent activity from github.com/sassoftware and publishes a message card to the team. Here's an example of a daily update:

    This card is fancier than my first example. I added action buttons that can direct the team members to the internal reports for more details and to the GitHub site itself. I used the Microsoft Teams documentation and the MessageCard Playground to design the experience:

    Messaging apps as part of a DevOps strategy

    Like many organizations, we (SAS) invest a considerable amount of time and energy into gathering metrics and building reports about our operations. However, reports are useful only when the intended audience is tuned in and refers to them regularly. With a small additional step, you can use SAS to bring your most interesting data forward to your team -- automatically.

    Whether you use Microsoft Teams or Slack, automated alerting and updates are a great opportunity to keep your teams informed. Each of these tools offers fit-for-purpose connectors that can tie in with information from other popular operational systems (Salesforce, GitHub, Yammer, JIRA, and many more). For cases where a built-in connector is not available, the webhook approach allows you to easily create your own.

The post How to publish to a Microsoft Teams channel using SAS appeared first on The SAS Dummy.

12月 122018
 

In her role as Product Manager for SAS Platform Technologies (including the SAS Add-In for Microsoft Office), my colleague Amy Peters hears this question often. With many organizations adopting Microsoft Office 365 -- the "cloud" version of Office -- what does this mean for other processes that integrate with Microsoft Office applications?

Microsoft has used different names for these similar offerings: Office 2016, Office 365, Microsoft 365, Office Online. The bottom line is that most users of a "365" package in the cloud, also have access to the Microsoft Office tools on their Windows desktop. They can use the full version of Excel, PowerPoint, Word, etc., and they also have access to these same tools via a web browser. At SAS, we recently experienced this transition ourselves. Have the Office applications on our desktops vanished? No, they have not. While more of our data is now on the cloud (looking at you, OneDrive), it's not really changing how we work, especially when creating/maintaining content. (Like many organizations, we already had one foot in this world by using Microsoft SharePoint for collaboration.)

Collaboration on the web. Full control on the desktop

Let's look at an example of how I use SAS with Microsoft Office. First, I create a report in SAS Visual Analytics. Then I open Excel on my desktop and use the SAS Add-In for Microsoft Office to embed the shared report into my spreadsheet. Want to see what that looks like in action? Check out this video Tech Talk with SAS developer Tim Beese.

Now suppose that I share this content in Microsoft OneDrive, and my colleague views it in Excel in a web browser. Yep, the content is still there. The difference is that the content is not dynamic like it is on my desktop. So what do you do when you want to edit that spreadsheet displaying in the browser? You select Open in Excel and the document opens on your desktop. Voila! The content is dynamic and you have all the functionality the SAS Add-In for Microsoft Office provides.

How is Microsoft Office 365 changing your workflow?

Today, the expectation of most users working with "Office Online" applications in their browsers is that it's primarily for viewing and basic editing. Will this change? Probably. We're researching how to provide more of the SAS Add-In for Microsoft Office function in a browser app. If you or your colleagues need this browser-based function – you want to do something specific in Excel with your SAS content -- we want to hear from you. And do you have a plan to move completely to browser-based Office apps? Currently you can't create SAS content from a browser-based Office app. If that's a pressing need, we would like to know. For now, we're not hearing of use cases where some form of the desktop app isn't still in the picture.

SAS integration with these everyday productivity tools, like Microsoft Office, is important to us. Don't forget about these SAS programming methods to create and read your Microsoft Office content:

How are you using Microsoft Office 365 with SAS? How do you think this workflow will change for you in the next year or two? Leave a comment -- we would love to hear from you.

The post Does SAS support Microsoft Office 365? appeared first on The SAS Dummy.

11月 292018
 

If your work environment is like ours here at SAS, you're seeing more of your data and applications move to the cloud. It's not yet a complete replacement for having local files on your desktop machine, but with cloud storage and apps -- like Microsoft OneDrive -- I can now access my work documents from any browser and any device, including my smartphone. I can update now my spreadsheets while waiting in the dentist office. Oh joy.

For those of us who use SAS to read and create Microsoft Excel documents, cloud-based files can add an extra wrinkle when we automate the process. It also adds some exciting possibilities! The Microsoft Office 365 suite offers APIs to discover, fetch, and update our documents using code. In this article, I'll show you how to use SAS programs to reach into your Microsoft OneDrive cloud to read and update your files. Note: All of this assumes that you already have a Microsoft Office 365 account -- perhaps provisioned by your IT support team -- and that you're using it to manage your documents.

Before I go on, I have to give major credit to Joseph Henry, the SAS developer who maintains PROC HTTP. Joseph did the heavy lifting for putting together the code and examples in this article. He also regularly adds new features to PROC HTTP that make it a more natural fit for calling REST APIs that require special authentication flows, such as OAuth2.

Using SAS with Microsoft OneDrive: an overview

Microsoft Office 365 uses an OAuth2-style authentication flow to grant access and permissions to third-party apps. When we're writing SAS programs to access Microsoft OneDrive, we're also writing a third-party app. This requires several setup steps, a few of which cannot be automated. Fortunately, these need to be done just once, or at least infrequently. Here's an outline of the steps:

  1. Register a new client application at the Microsoft Application Registration Portal. (You will need to sign in with your Office 365 credentials, which might be your primary organization credentials if you have single-signon with Active Directory.)
  2. Using your browser while you are signed into Office 365, navigate to a special web address to obtain an authorization code for your application.
  3. With your authorization code in hand, plug this into a SAS program (PROC HTTP step) to retrieve an OAuth2 access token (and a refresh token).
  4. With the access token, you can now use PROC HTTP and the Microsoft Office 365 APIs to retrieve your OneDrive folders and files, download files, upload files, and replace files.

You'll have to complete Step 1 just once for your application or project. Steps 2 and 3 can be done just once, or at least just occasionally. The access token is valid for a limited time (usually 1 hour), but you can always exchange the refresh token for a new valid access token. This refresh token step can be automated in your program, usually run just once per session. Occasionally that refresh token can be revoked (and thus made invalid) when certain events occur (such as you changing your account password). When that happens, you'll need to repeat steps 2 and 3 to get a new set of access/refresh tokens.

Step 1: Register your application

Visit the Microsoft Application Registration portal to register your new app. You'll sign in with your Microsoft Office 365 credentials.

Microsoft Application Registration portal

Note: At the time of this writing, Microsoft was testing a new web experience for application developers. I opted for the "preview experience" with the hope that my screenshots would have a longer shelf life for future readers.

Click New Registration to get started. This presents you with a form where you can complete the details that define your app. Mainly, you're giving it a name and defining its scope. You'll probably want to limit its use to just your organization (your company) unless you're collaborating with colleagues who work elsewhere.

"Register an application" form

When you create an app, you'll receive a Client ID (unique to your app) and Tenant ID (unique to your organization). You'll need these values to obtain your authorization code and tokens later. The application portal provides a sort of control center for all aspects of your app. (Note: I masked out my client ID and tenant ID in this screenshot.)

Details for my sample application

Specifying your app permissions

Your app will need specific permissions in order to function. In my example, I want my SAS program to read documents from my OneDrive, and also add new docs and update existing docs. The permissions I need are:

  • Files.ReadWrite.All: Allows the app to read, create, update and delete all files that you can access.
  • User.Read: Allows you to sign in to the app with your organizational account and let the app read your profile.

To add these to your app, click the API Permissions tab in the control center. To be clear, these are not permissions that your app will automatically have. These are the permissions that will be requested when you "sign into" the app for the first time, and that you'll have to agree to in order for the app to run.

Adding permissions that the app needs

Creating a configuration file

There are a few app-specific values that we'll need to reference throughout the SAS programs we're writing. I decided to create a configuration file for these settings rather than hard-code them into my SAS statements. This will make it easier for other people to reuse my code in their own applications.

I created a file named conf.json that looks like this (but with different tenant_id and client_id values):

{
  "tenant_id": "206db638-6adb-41b9-b20c-95d8d04abcbe",
  "client_id": "8fb7804a-8dfd-40d8-bf5b-d02c2cbc56f3",
  "redirect_uri": "https://login.microsoftonline.com/common/oauth2/nativeclient",
  "resource" : "https://graph.microsoft.com"
}

By "externalizing" the IDs specific to my account/instance, I can use SAS code to read the values at run time. Note: This code, like all of the code in this article, uses features from SAS 9.4 Maintenance 5.

/*
  Set the variables that will be needed through the code
  We'll need these for authorization and also for runtime 
  use of the service.
 
  Reading these from a config.json file so that the values
  are easy to adapt for different users or projects.
*/
 
%if %symexist(config_root) %then %do;
  filename config "&config_root./config.json";
  libname config json fileref=config;
  data _null_;
   set config.root;
   call symputx('tenant_id',tenant_id,'G');
   call symputx('client_id',client_id,'G');
   call symputx('redirect_uri',redirect_uri,'G');
   call symputx('resource',resource,'G');
  run;
%end;
%else %do;
  %put ERROR: You must define the CONFIG_ROOT macro variable.; 
%end;

Step 2: Obtain an authorization code

Now that I've defined the application, it's time to "sign into it" and grant it the permission to read and manage content in OneDrive. This step needs to be completed from a web browser while I am signed into my Microsoft Office 365 account. The web address is very long...but we can use a SAS program to generate it for us.

/* location of my config file */
%let config_root=/folders/myfolders/onedrive;
 
%include "&config_root./onedrive_config.sas";
 
/* Run this line to build the authorization URL */
%let authorize_url=https://login.microsoftonline.com/&tenant_id./oauth2/authorize?client_id=&client_id.%nrstr(&response_type)=code%nrstr(&redirect_uri)=&redirect_uri.%nrstr(&resource)=&resource.;
options nosource;
%put Paste this URL into your web browser:;
%put -- START -------;
%put &authorize_url;
%put ---END ---------;
options source;

This produces these output lines in the SAS log:

 Paste this URL into your web browser:
 -- START -------
https://login.microsoftonline.com/206db638-6adb-41b9-b20c-95d8d04abcbe/oauth2/authorize?client_id=8fb7804a-8dfd-40d8-bf5b-d02c2cbc56
f3&response_type=code&redirect_uri=https://login.microsoftonline.com/common/oauth2/nativeclient&resource=https://graph.microsoft.com
 ---END ---------

Copy and paste the URL (all on one line, no spaces) into the address bar of your web browser. When you press Enter, you'll be prompted to grant the required permissions:

Once you click Accept, the browser will redirect to what looks like a blank page, but the URL contains the authorization code that we need:

Copy the value that appears after the code= in the URL. It's going to be a very long string -- over 700 characters. We'll need that value for the next step.

Step 3: Obtain an access token

My colleague Joseph wrote a few convenient utility macros that can help manage the access token and refresh token within your SAS session. These macros include:

  • %get_token - get the initial access and refresh tokens, given an authorization code. Remember, an access token will expire in about 60 minutes. But the refresh token can be used to get a renewed access token.
  • %refresh - exchange a valid refresh token for a new access token
  • %process_token_file - read/update an external token file so that these values persist beyond your current SAS session.

I'm not going to walk through the macro code in this article, but the SAS programs are straightforward and well-documented. See "How to get this example code" at the end of this article.

With these macros in place, we can paste the (very long) authorization code we retrieved in the previous step into a macro variable. Then we can run the %get_token macro to generate the tokens and store them in a local file.

%let config_root=/folders/myfolders/onedrive;
 
%include "&config_root./onedrive_config.sas";
%include "&config_root./onedrive_macros.sas";
 
filename token "&config_root./token.json";
%let auth_code=AQABAAIAAAC5una0EUFgTIF8ElaxtWjTqwohjyfG; * and much more;
 
/*
  Now that we have an authorization code we can get the access token
  This step will write the tokens.json file that we can use in our
  production programs.
*/
%get_token(&client_id.,&auth_code,&resource.,token,tenant=&tenant_id);

Running this step will create a new file, token.json, in your designated config folder. Here's an screenshot of what my version looks like right now:

It's very important that you keep this file secure. With the information in this file (your refresh token) and your conf.json file (with your client ID and tenant ID), anyone can use these code techniques to impersonate you and access your Microsoft Office 365 data. There are techniques for storing these files such that only you can see them.

Using Microsoft Office 365 APIs to access OneDrive from SAS

Whew! It took near 1500 words to get this far, so thanks for sticking with me. The good news is that these steps take much longer to describe than to actually execute. Plus, creating apps is fun! (Right?)

From the screenshots I've shared, you probably already noticed that these services are working on Microsoft Azure, which is Microsoft's cloud platform for applications. For the remainder of this article, I'll be using methods from the Microsoft Graph API. This REST-based API provides access to almost all of Microsoft's hosted services. For my examples, I'll be using methods within the Files component of the API: Drives and Drive Items (folders and files).

Initializing and refreshing the access token in a new session

Now that we have the access and refresh tokens, we can get down to business with some actual OneDrive interactions. Here's how to initialize your SAS session with the tokens.

%let config_root=/folders/myfolders/onedrive;
 
%include "&config_root./onedrive_config.sas";
%include "&config_root./onedrive_macros.sas";
 
/*
  Our json file that contains the oauth token information
*/
filename token "&config_root./token.json";
 
%process_token_file(token);
 
/* If this is first use for the session, we'll likely need to refresh  */
/* the token.  This will also call process_token_file again and update */
/* our token.json file.                                                */
%refresh(&client_id.,&refresh_token.,&resource.,token,tenant=&tenant_id.);
 
/*
  At this point we have a valid access token and we can start using the API.
*/

If all goes well, we'll have our access token, and it will be stored in a macro variable named &access_token. It's going to be another long and illegible (>700 characters) value.

(Ever hear of the "infinite monkey theorem? That a monkey hitting a typewriter for an infinite amount of time is certain to produce a certain text, such as the complete works of Shakespeare? Well, that monkey is not going to produce this access token. Plus, who has a typewriter anymore?)

Retrieving the top-level drive identifier

We'll need to explore the OneDrive system from the top-down, using code. First, we need the identifier for the root drive. It's possible for you to have multiple root drives, and if that's the case for you, you'll need to modify this code a bit. This code queries the service for your drives, and stores the identifier for just the first drive in a macro variable. We'll need that identifier later to retrieve a list of top-level items.

/*
First we need the ID of the "drive" we are going to use.
to list the drives the current user has access to you can do this
*/
filename resp TEMP;
/* Note: oauth_bearer option added in 9.4M5 */
proc http url="https://graph.microsoft.com/v1.0/me/drives/"
     oauth_bearer="&access_token"
     out = resp;
	 run;
 
libname jresp json fileref=resp;
 
/*
 I only have access to 1 drive, but if you have multiple you can filter 
 the set with a where clause on the name value.
 
 This creates a data set with the one record for the drive.
*/
data drive;
 set jresp.value;
run;
 
/* store the ID value for the drive in a macro variable */
proc sql noprint;
 select id into: driveId from drive;
quit;

Note that this code uses the new OAUTH_BEARER option in PROC HTTP -- a convenient addition when working with OAuth2-compliant APIs. This is shorthand -- and more intuitive syntax -- for placing "Authorization: Bearer TOKEN-VALUE" in the HTTP headers.

Retrieve a list of top-level folders/files

With the drive identifier in hand, I can use the /children verb on the Microsoft Graph API to get a list of all of the top-level objects in that drive. These represent the folders and files that are at the root.

/*
 To list the items in the drive, use the /children verb with the drive ID
*/
filename resp TEMP;
proc http url="https://graph.microsoft.com/v1.0/me/drives/&driveId./items/root/children"
     oauth_bearer="&access_token"
     out = resp;
	 run;
 
libname jresp json fileref=resp;
 
/* Create a data set with the top-level paths/files in the drive */
data paths;
 set jresp.value;
run;

Here's what I'm keeping in my OneDrive right now. It's not too disorganized, is it?

List the files in a particular folder

If I'm interested in exploring a particular folder, I'll need to find the folder identifier as it's known to OneDrive. Using PROC SQL and SELECT INTO, I can find the folder by its name and store its ID in another macro variable. Then, I use the /children verb again, but this time with the folder ID instead of the "root" constant.

/*
 At this point, if you want to act on any of the items, you just replace "root" 
 with the ID of the item. So to list the items in the "SASGF" folder I have:
  - find the ID for that folder
  - list the items within by using the "/children" verb
*/
 
/* Find the ID of the folder I want */
proc sql noprint;
 select id into: folderId from paths
  where name="SASGF";
quit;
 
filename resp TEMP;
proc http url="https://graph.microsoft.com/v1.0/me/drives/&driveId./items/&folderId./children"
     oauth_bearer="&access_token"
     out = resp;
	 run;
 
/* This creates a data set of the items in that folder, 
   which might include other folders.
*/
libname jresp json fileref=resp;
data folderItems;
 set jresp.value;
run;

Here are the items from my SASGF folder. Can you tell that I don't throw anything away?

Download a file from OneDrive and import into SAS

I know that I keep a spreadsheet named "sas_tech_talks_18.xlsx" in this SASGF folder. With the /content verb, I can download the file from OneDrive and store it in the file system that is local to my SAS session. Then, I can use PROC IMPORT to read it into a SAS data set.

/*
 With a list of the items in this folder, we can download
 any item of interest by using the /content verb 
*/
 
/* Find the item with a certain name */
proc sql noprint;
 select id into: fileId from folderItems
  where name="sas_tech_talks_18.xlsx";
quit;
 
filename fileout "&config_root./sas_tech_talks_18.xlsx";
proc http url="https://graph.microsoft.com/v1.0/me/drives/&driveId./items/&fileId./content"
     oauth_bearer="&access_token"
     out = fileout;
	 run;
 
/* Import the first sheet into a SAS data set */
proc import file=fileout 
 out=sasgf
 dbms=xlsx replace;
run;

Boom! I've just downloaded my data from the cloud and brought it into my SAS session.

Add a new file to OneDrive

We can build wonderful documents from SAS too, and it's important to be able to share those. By using the PUT method with the /content verb, we can copy a file from the local SAS session into a target folder on OneDrive. Most often, this will probably be an Excel spreadsheet or maybe a PDF report. (But hey, maybe it's a good opportunity to try out

/*
  We can upload a new file to that same folder with the PUT method and /content verb
  Notice the : after the folderId and the target filename
*/
 
/* Create a simple Excel file to upload */
%let targetFile=iris.xlsx;
filename tosave "%sysfunc(getoption(WORK))/&targetFile.";
ods excel(id=upload) file=tosave;
proc print data=sashelp.iris;
run;
ods excel(id=upload) close;
 
filename details temp;
proc http url="https://graph.microsoft.com/v1.0/me/drives/&driveId./items/&folderId.:/&targetFile.:/content"
  method="PUT"
  in=tosave
  out=details
  oauth_bearer="&access_token";
run;
 
/*
  This returns a json response that describes the item uploaded.
  This step pulls out the main file attributes from that response.
*/
libname attrs json fileref=details;
data newfileDetails (keep=filename createdDate modifiedDate filesize);
 length filename $ 100 createdDate 8 modifiedDate 8 filesize 8;
 set attrs.root;
 filename = name;
 modifiedDate = input(lastModifiedDateTime,anydtdtm.);
 createdDate  = input(createdDateTime,anydtdtm.);
 format createdDate datetime20. modifiedDate datetime20.;
 filesize = size;
run;

Replace/update a file in OneDrive

If you want to replace an existing file, then you'll want to perform the additional step of retrieving the unique ID for that file from OneDrive. When you PUT the new version of the file into place, its history and sharing properties should remain intact. Here is my code for navigating the folder/file structure in my OneDrive and finally replacing an existing file.

/*
  If you want to replace a file instead of making a new file 
  then you need to upload it with the existing file ID.  If you
  don't replace it with the existing ID, some sharing properties
  and history could be lost.
*/
/* Create a simple Excel file to upload */
%let targetFile=iris.xlsx;
filename tosave "%sysfunc(getoption(WORK))/&targetFile.";
ods excel(id=upload) file=tosave;
proc print data=sashelp.iris;
run;
ods excel(id=upload) close;
 
/* Navigate the folder and file IDs from my OneDrive */
proc sql noprint;
 select id into: folderId from paths
  where name="SASGF";
quit;
 
proc http url="https://graph.microsoft.com/v1.0/me/drives/&driveId./items/&folderId./children"
     oauth_bearer="&access_token"
     out = resp;
	 run;
 
libname jresp json fileref=resp;
data folderItems;
 set jresp.value;
run;
 
/* Find the ID of the existing file */
proc sql noprint;
 select id into: fileId from folderItems
  where name="iris.xlsx";
quit;
 
libname attrs json fileref=details;
proc http url="https://graph.microsoft.com/v1.0/me/drives/&driveId./items/&fileId./content"
 method="PUT"
 in=tosave
 out=details
 oauth_bearer="&access_token";
run;

As you can see from my OneDrive history for this file, I've tested this program a few times -- resulting in 23 revisions of this file in its history!

How to get this example code

You can find the source files for these examples on GitHub.

I've organized this code into 4 different files in order to make it easy to reuse:

  • onedrive_config.sas - read the fields from the conf.json and set them as global macro variables. This includes your client_id and tenant_id.
  • onedrive_setup.sas - the SAS statements that represent code you will need to run just once to get your authorization code and first access code.
  • onedrive_macros.sas - three utility macros that help you to create, refresh, and manage your access token and refresh token in your token.json file
  • onedrive_example_use.sas - sample SAS steps that I used in this article. They won't quite work for you as-is, since you don't have the same files that I do. (Unless you do have the same files, in which case...creepy.) My hope is that you can read and adapt them for your own content.

I also included a template for the conf.json file, with obvious placeholders for the client_id and tenant_id that you'll substitute with your own values. You'll also need to change the statements that define &CONFIG_LOC -- the location of your configuration directory where you're storing these files. I developed these examples in SAS University Edition -- yes, this works there! I also ran the code from my full SAS environment via SAS Enterprise Guide.

More about using REST APIs from SAS

This has been a monster article -- in terms of its length. But I hope it's clear enough to follow and has sufficient detail for you to try this on your own. If you have questions, post in the comments.

I've published a number of other articles about using REST APIs from SAS -- it's one of my favorite things to do. Check out:

The post Using SAS to access and update files on Microsoft OneDrive appeared first on The SAS Dummy.